Safety operation rules of flat vulcanizing machine

1. Wear protective equipment during operation. Do not use wet gloves.

2. Preheat the plate before vulcanization, and check whether there is any foreign matter between the layers and whether the other parts are normal. 

3. The pressure gauge and thermometer should be sensitive and effective. According to the safety and process conditions, strictly control the steam pressure, oil pressure and vulcanization temperature.

4. When loading the vulcanization mold, do not put your hand into the flat room to prevent hot hands or crushing. If you find a problem, stop and handle it. The mold used should be placed stably to prevent injury from falling.

5. After the operation is completed, cut off the power supply, turn off the water and water valves, and return the mold to the designated place .